Troubleshooting Enrollments
  • 7 Minutes to read
  • Dark
    Light

Troubleshooting Enrollments

  • Dark
    Light

Article summary

Courses can be assigned to several objects within the system. These objects are groups, subscriptions, and requirements. 

Diagram - Troubleshooting Enrollments 1 20220621

Users can be enrolled in a course in any of the following ways:

  • By belonging to a group that has been assigned the course
  • By being enrolled in a subscription variant that contains the course
  • By being assigned a learning plan that contains the course. 

Diagram - Troubleshooting Enrollments 2 20220621

When an enrollment fails, it could be due to a group, subscription, or requirement setting. It may also be due to a user's setting. Keep in mind that the information displayed in the Confirm Update accordion during the manual enrollment process is a preliminary check. You should confirm that the enrollments were successfully processed when you receive the Enrollment Process Complete email

It may take some time for the system to process enrollments.

Below are the most of common causes for failed enrollments and their error messages.

Cause

Error Message(s)

User Already Enrolled In Course

  • Course already enrolled. 
  • User has already been enrolled in this course and has confirmed attendance. 

Course or Subscription Not in User's Group

  • This course is not in the user's home group and therefore cannot be enrolled. 
  • This course is not in the user's enrollment group and therefore cannot be enrolled. 
  • Subscription not assigned to group.

Insufficient Group Credits

  • Group has insufficient credits to enroll in a course. 
  • There are no group course credits available for this enrollment. Please contact your account administrator for further information. 
  • There are no group subscription credits available for this enrollment. Please contact your account administrator for further information.

Cannot Self Enroll

  • You cannot self enroll for this course. 

No Sessions Available

  • This course has no sessions available and therefore cannot be enrolled.

User Already on Waiting List

  • Session is full; user is already on waiting list.
  • Session full; already on waiting list.

Enrollment Window Closed

  • Course enrollment failed. Enrollment window is closed.

Enrollment Date After Course Due Date

  • Due date is earlier than the enrollment date.
  • Enrollment date is past the course due and/or completion access date. 
  • Course enrollment failed. Enrollment date is past the course due date.

Enrollment Date After Grace Period Date

  • Grace period date is earlier than the enrollment date.
  • Course enrollment failed. Enrollment date is past the course grace period date.

Enrollment Date After Course Completion Access Date

  • Enrollment date is past the course due and/or completion access date. 

Subscription Lock Enabled for Course

  • User is not subscribed to the subscription. Please contact your account administrator for further information.

Learning Plan Lock Enabled for Course

  • This course is only available within a learning plan and no learning plan was provided.

User Already Enrolled in Course

Errors

Course already enrolled.

Or

User has already been enrolled in this course and has confirmed attendance. 

Causes

This error occurs when a user is already enrolled in the course.

Solution

No action is needed unless you've made changes to the online or SCORM course and want to enroll the user in the latest version of the course. If this is the case, you will need to unenroll the user from the course, then enroll them in course again. 

Course or Subscription Not In User's Group

Errors

This course is not in the user's home group and therefore cannot be enrolled. 

Or

This course is not in the user's enrollment group and therefore cannot be enrolled. 

Or

Subscription not assigned to group.

Causes

The error may occur when:

Solution

Assign the course or subscription to the group.

Insufficient Group Credits

Errors

Group has insufficient credits to enroll in a course.

Or

There are no group course credits available for this enrollment. Please contact your account administrator for further information.

Or

There are no group subscription credits available for this enrollment. Please contact your account administrator for further information.

Causes

This error may occur when: 

  • A group's course or subscription has its Credits setting checked but the group has no credits available, attempts to enroll the group's users in the course or subscription will fail.
  • Users attempt to self-enroll in a course that requires credits. 

Solution

To allow enrollments into the course, credits will need to be added to the group

Cannot Self Enroll

Error

You cannot self enroll for this course.

Causes

This error may occur when: 

  • A course that allowed for self-enrollment was available in the learner interface. While the user had the course details page with the Enroll button displayed, someone unchecked the Self-Enroll setting for the group's course
  • A course was available for self-enrollment through a learning plan or subscription, but was removed before the enrollment process was completed.

Solution

Verify whether the Self-Enroll setting for the group's course should be enabled or disabled.

If you do not want to allow users to self-enroll in the group's course, a user with the required permissions can manually enroll the user in the course

No Sessions Available

Error

This course has no sessions available and therefore cannot be enrolled. 

Cause

An instructor-led course assigned to a group, subscription, or learning plan requirement has its Auto setting set to First Available or First Available (until pass), but there are no sessions available and the course's waiting list is disabled.

Solution

There are several ways to address this type of failed enrollment.

  • Add new sessions to the instructor-led course, then view the recommended enrollment.
  • Change the course's Auto setting for the group, subscription, or learning plan requirement to Waiting List or Waiting List (Until Pass). You will also need to enable the course and/or session waiting list.

User Already on Waiting List

Errors

Session is full; user is already on waiting list.

Or

Session full; already on waiting list (Learner UI)

Causes

This error may occur when: 

  • You attempt to enroll a user in a course waiting list, but the user is already on the course waiting list. 
  • Users attempt to self-enroll in a course waiting list that they are already on.

Solution

No action is needed if you want to leave the user on the course waiting list.

To enroll the user in one of the course's sessions or remove them from the course waiting list, use the ILT Waiting Lists Dashboard.

Enrollment Window Closed

Error

Course enrollment failed. Enrollment window is closed.

Cause

The enrollment was processed outside of the instructor-led course session's enrollment open and enrollment close date.

Solution

You can either adjust the session's enrollment open date or enrollment close date, or enroll the user in a different session.

Enrollment Date After Course Due Date

Errors

Due date is earlier than the enrollment date.

Or

Enrollment date is past the course due and/or completion access date. 

Or

Course enrollment failed. Enrollment date is past the course due date.

Causes

This error may occur when: 

Solution

Do one of the following:

Enrollment Date After Grace Period Date

Errors

Grace period date is earlier than the enrollment date.

Or

Course enrollment failed. Enrollment date is past the course grace period date.

Cause

The enrollment was processed after the online or SCORM course's grace period date. 

Solution

Manually change the course's grace period date during the enrollment process so that it's later than today's date.

Enrollment Date After Course Completion Access Date

Error

Enrollment date is past the course due and/or completion access date. 

Causes

This error may occur when: 

Solution

Edit the online or SCORM course and do one of the following:

Completion Date

Subscription Lock Enabled for Course

Error

User is not subscribed to the subscription. Please contact your account administrator for further information.

Cause

The course you are attempting to enroll the user in is part of a group's subscription and has its Subscription Lock setting enabled.

Solution

Do one of the following:

  • To enroll the user in the course through the originally selected group, you will need to enroll the user in a subscription variant that contains the course. After enrolling the user in the subscription variant, you can enroll the user in the course. 
  • If the course is assigned to another group to which the user belongs, you can enroll the user in the course through a different group.

Learning Plan Lock Enabled for Course

Error

This course is only available within a learning plan and no learning plan was provided.

Cause

The course you are attempting to enroll the user in is part of a group's learning plan and has its Learning Plan Lock setting enabled.

Solution

Do one of the following:

  • To enroll the user in the course through the originally selected group, you will need to first assign the learning plan that contains the course to the user. After assigning the learning plan to the user, you can enroll the user in the course. 
  • If the course is assigned to another group to which the user belongs, you can enroll the user in the course through a different group.

Was this article helpful?


What's Next